Need to protect your ride from stones and debris chipping away at your rides' underbody or rocker panels?  Once again, Wurth has come up with a great solution for you - a rapid drying and paintable coating that will provide you with a permanent, flexible rubber-plastic coating.  Sprays on as a very fine texture without that lumpy look of other coatings.  Easy to use with no messy clean up.  Available in clear and black. 

A permanent, flexible, fast drying rubberized black undercoating that you can spray into just about anywhere.  Protects against chipping and corrosion.  This formula can also be painted if you should so choose.

Lay just the right amount of paint in that paint chip.  Our microbrush is made up of micro non-linting, non-absorbent fibers.  Paint, or just about any solution, is held in suspension between the fibers creating a non-dripping sphere that will stay-put until it is applied.  Place as small as 1/8 of a drop with accurate precision into the chip.  Blends easily into any angle for the placement of material where you have limited access.  You will use up to 60% less paint by reducing the amount of excess material applied using ordinary brushes with the added benefit of a much better looking chip repair.

The latest breakthrough in penetrating lubricant technology.  Releases seized joints, nuts and bolts quickly and reliably by freezing the part to sub-zero temperatures fast.  Micro-crack seeping action breaks up the rust by creeping into the smallest of cracks and openings.  The can will spray in all directions to aid in getting into the tight spots.

Lock and seal threaded fasteners up to 3/4" thread diameter with Wurth's medium strength, blue threadlocker.  A universal product with a high viscosity to ensure proper gap filling.  Prevents loosening caused by vibration.  Works within a temperature range of -67° F to 302° F.  Also suitable for stainless steel and plated surfaces.  Parts can be removed using hand tools.  Not sensitive to surface contaminants.

An awesome synthetic lubricant that adheres strongly to metal.  Resists temperatures from -31^oF to +392^oF.  When applied, HHS 2000 starts off as a penetrant then sets into a clear grease for long lasting lubrication.  Does not contain any silicones.  Highly resistant to water, salt, most acids and alkalies and it's Ph neutral.  Will not harm plastics and rubber.  Long reach tube included. 

An exceptional lubricant specially suited for lubricating cylinder locks on your ride.  Prevents premature wear, jamming, squeaking and rattling.  Keeps window and door hinges running smoothly as well.  Will not attract and collect grit.  Displaces water.  An excellent preventative measure to keep your locks from freezing.

A versatile all around 4-in-1 product for your batteries.  Designed to clean, detect, neutralize and protect.  The advanced formulation cleans through a foaming action that penetrates and emulsifies dirt, grease and deposits.  As a detector, the light red foam turns a brilliant blue in the presence of acid.  In its role as a neutralizer, the formula increases the pH to a safer level.  And finally, as a protector, the red film provides a durable temperature resistant film against corrosion and the elements. 

An oxidation loosening cleaning agent for electrical contacts of all kinds.  Removes oxide & sulfide layers, resins, oil and dirt.  Eliminates high resistances and crackling noises.  Safe to use on most usual construction materials.  Leaves a protective film to help prevent oxidizing.  Does not contain any halogen.

With a thick consistency, this grease lubricates rubber and plastic parts and protects electrical components as well.  Great for use on rubber o-rings, seals, spark plug boots, plastic gears, etc.  Use when installing bulbs and fuel injection connectors.  Forms a waterproof seal, even on electrical connectors on boats and jet skis.  High thermal conductivity withstands temperatures to 400° F.  Low toxicity.  Contains no petroleum distillates.

Here is one of those products that has more uses than you can imagine.  A real problem solver and time saver!  Anything that can benefit from being cooled down is a candidate for Freeze Spray.  Use for speed cooling of hot melt glue, remove molding glue and double sided tape residue, remove gum from car mats and carpeting.  On more of the mechanical side, use Freeze Spray to ease insertion of close tolerance studs by cooling the studs to reduce their size, ease the fitting of ball bearings, sleaves and shafts or cool down hot engine parts before working on them - a real time saver.  Let your imagination find even more uses!

An easy to use epoxy compound kit that fills and finishes damaged hard plastic parts, including all thermo plastic olefins.  A quick set formula that will save you time.  Ready in as little as 20 minutes to be sanded to a seamless feather edge.  For finishing, the repair will accept all automotive paints for that final great fit and finish.  Use to repair your rides' spoilers, ground effects, bumper covers, air dams and much more.  Kit contains (2) tubes with a total of 10 oz. of epoxy material.  Comes with clear, easy instructions that you can also view here. 

Use Wurth's tape for your plastic repairs to reinforce the back sides of all torn or punctured plastic panels, tabs, bumpers, etc.  Has an adhesive backing for easy use.  Comes with a generous 65' on each roll.

A fast curing and super high strength kit for welding plastic back together again.  Use to repair tears in flexible and semi-rigid types of plastic.  Kit contains (1) Plastic Weld 10 ml. bottle and (1) Plastic Weld Activator 2 oz. sprayer.

Use the Debonder to safely remove cured material from our Wurth Plastic Weld Kit.  Misalign a part?  No problem, the Debonder will give you a second chance.  Accidently weld your fingers together?  No problem, the Debonder will safely remove the cured material from your fingers. 

Wurth's Zinc Rich Weld Thru Primer is 98% to 99% pure zinc!   Can be applied reliably to all metals.  Contains a special epoxy resin for great adhesion.  Provides long term cathodic protection for all metallic surfaces while maintaining good electrical conductivity.  Resistant to heat up to 914° F. 

An outstanding, heat resistant paint.  Wurth's formulation contains 62% more solids than the others.  An excellent choice for manifolds, exhaust and muffler systems.  A long lasting finish that won't burn off.  In fact, the durability and finish improves with curing over time.  Available in a black or aluminum color finish.

The quality of Wurth paint available for that hard to match black trim.  Designed to match most factory blacked out trim finishes.  Can be used to refinish primed steel, aluminum and plastic.  Works as a great choice for painting flexible bumpers or plastics. 

Wurth has come out with a truly revolutionary spray-on metalizing treatment that is designed to prevent brake noise directly at the source.  Their SBS Brake Treatment II is applied directly to brake pads and rotors.  The treatment consists of microfine aluminum particles that form a molecular bond with the rotor/drum friction surfaces.  The composite surface finish ends annoying vibrations and brake squeal at the source and even extends brake life.  The effectiveness has been tested from -100° F to 1800° F and the benefits will last up to 1 year or 10,000 miles.  No drying time is needed and it can be used on all brake systems.  Also useful when sprayed on lugnuts to prevent rust and seizure.  Also useful for dressing up the rotors with a nice aluminum look before showing your car.